Bags, backpacks, tents, boats, aeroplanes, furniture, caravans, trucks, motorhomes, trailers, DIY shops, gate drives, ladders, sports lessons, outdoor sport, hiking, skiing etc. etc.
Our technical belts are unobserved companions in your daily life. Whether direct or indirect - webbing straps in different widths and designs are always around us.
Please consider that for all belts the base raw material is decisive on how the subsequent processes take effect. The technical properties which should be fulfilled by the finished product often dictate which raw material has to be used for the base belt. Please always contact us before selecting materials - developments that lead to dead ends can thus be avoided.
Only one example: The finished product will be a personalised, printed bag carrying strap. A base material of polypropylene would only partially be the right selection. Printing on polypropylene is very difficult! A better idea would be in this case to directly weave in the personalisation - which is in turn ideally done with polyester yarns.
Further processing to a complete finished product turns the woven webbing strap then into a usable, finished product. Continuous lengths are rarely used (tree belts & belts in general).
This further development to a finished product once again requires special knowledge. We would be happy to help you with the development to a finished product - just give us a call!
Once the woven material is completely wound and coordinated for the final product the finished webbing strap piece good is developed.
The basis for every finished product is the continuous strap - the first step on the way to achieve this is the cutting. Nowadays we have the following options available...
Every product requires suitable cutting processes, since raw material and quality of the finished belt is decisive. After cutting and if necessary perforation in the belt, the following steps are carried out...
The individual work steps are accompanied by our quality control system certified as per DIN ISO 9001:2008. We would be happy to complete the relevant logs for you. Upon request, we would be happy to create the technical data sheets for belts and fitting parts.
If tools are necessary for the manufacture of the entire belt system, then we are able to make them in our in-house tooling department. If we venture into highly specific technologies, then we will work with local partner companies. The "Swabian Alb" region of inventors gives us access to the perfect contacts in this sector directly on our doorstep.
We want to provide you with the perfect end product based on the motto "everything from one source". A contact person, a manufacturing chain, a development: a success!